Failed to play test tone on Windows 10 / 11

• The Failed to play test tone error message can appear if there is a hardware issue or your audio drivers are outdated.
• You can solve this sound error by verifying the entries in the Registry Editor.
• To fix the Failed to play test tone issue on Windows 10 keep your drivers up to date.
• If your speakers failed to play a test tone, make sure to have the correct sound settings.

XINSTALL BY CLICKING THE DOWNLOAD FILE

• Restoro has been downloaded by 0 readers this month.

Although many users are using Windows 10, it seems that some users are having certain issues.

Speaking of which, Windows 10 users are reporting that they are getting Failed to play test tone message, so let’s see if we can fix that.

How do I fix failed to play test tone? We’d first advise you to update your Windows 10 with latest patches or try changing speaker settings or switching to default drivers.

This error message can cause various problems with audio on your PC. In addition to this error, users reported the following problems as well:

• Conexant Audio, Sound Blaster, IDT, Realtek Audio failed to play test tone – According to users, this error usually appears with IDT or Realtek audio devices; the issue is usually caused by an outdated driver and it can be easily fixed
• USB audio failed to play test tone – If you’re getting this error, it might be because you’re using a USB sound card or USB headphones; according to users, the problem occurs more often with USB audio devices
• AMD HDMI audio failed to play test tone – Sometimes your graphics card drivers can install audio drivers as well; users reported this error message when using HDMI cable with an AMD graphics card
• Dell, HP audio failed to play test tone – Audio problems such as this one can occur on almost any PC, and both Dell and HP users reported this problem on their devices
• Laptop no sound, failed to play test tone – This issue affects both desktop and laptop PCs alike; in fact, the issue is more common on certain laptops than on desktop PCs
• Sound card failed to play test tone – If you’re having this problem on your PC, you might want to know that it can affect almost any sound card; according to users, both dedicated and built-in sound cards are affected by this issue
• Sound failed to access device – This is another variation of this error, and if you have it on your PC, you should be able to fix it by using one of our solutions
• Failed to play sound, sound disabled – In some cases, you won’t be able to play any sounds on your PC; according to users, the sound can become completely disabled on your PC due to this problem;
• Unable to play sound on laptop – This problem affects both desktop and laptop PCs alike; this is a serious problem, and many users reported that they are unable to play any sound on their laptop.

What to do if you can’t play Sound Test Tone in Windows 10?

1. Change speaker settings

Users report that when upgrading to Windows 10 their speaker settings change to Quadraphonic, depending on how the OS saw your external sound devices.

If you’re using a 5.1 speaker system, go to your speaker settings and change them from Quadraphonic to 5.1. After changing the settings you should be able to play a test sound.

2. Switch to default drivers

Right-click it, and choose Uninstall.

Check Delete the driver software for this device and click Uninstall.

After the driver has been uninstalled press Search for new hardware button. This will install the default audio driver.

Next thing we’re going to try is switching to default drivers. To do this, you need to do the above steps.

3. Update your drivers

3.1. Update drivers manually

Go to the taskbar, type in device manager, then select Device Manager.Look for the device you want to update then click on it.

Windows 10 drivers usually get automatically updated, however sometimes it’s best you perform this procedure manually, just to make sure your OS is not missing certain crucial files.

3.2. Use professional software

Windows 10 usually installs all the necessary drivers, it does a good job finding and recognizing your devices. But, sometimes it does not and you have to manually install or update them.

The easiest solution is to have a tool that automatically installs all the drivers you need.

Most of the time, the generic drivers for your PC’s hardware and peripherals are not properly updated by the system.There are key differences between a generic driver and a manufacturer’s driver.Searching for the right driver version for each of your hardware components can become tedious. That’s why an automated assistant can help you find and update your system with the correct drivers every time, and we strongly recommend DriverFix. Here’s how to do it:

DriverFix

Keep your PC components drivers working perfectly without putting your PC at risk.

Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.

4. Install High Definition Audio Device

Right click it and choose Update driver.

Choose Browse my computer for driver software option.

Now choose Let me pick from a list of device drivers on my computer.

In the list of drivers choose High Definition Audio Device.

Click Next and if you get a warning choose Yes.

If switching to default audio device didn’t get the job done, you can try with installing high definition audio device. To install High Definition Audio Device on Windows 10, do the above steps.

5. Change the sound format

Right-click the volume icon in your sysbar and choose Playback devices from the menu.

Select your audio device and click on Properties.

Now in the DefaultFormat section select a different audio format. Click on Apply and OK to save changes.

If you’re frequently getting Failed to play sound test tone error message, you might be able to solve the problem simply by changing your audio format.

After doing that, check if your sound is working properly. Many users reported that this solution fixed the problem for them, so be sure to try it out.

Keep in mind that you’ll have to try using several different formats before you find the one that works for you.

If changing the format doesn’t work, several users are recommending to click Restore Default button to restore your audio settings to original values.

6. Disable all audio enhancements

Navigate to the Enhancements tab and check Disable all enhancements. Click on Apply and OK to save changes.

Sometimes Failed to play sound test tone error message can appear if you’re using certain audio enhancements.

Many sound cards support enhancements, but often they can interfere with Windows and cause this problem to occur. To fix the issue, you need to disable audio enhancements.

After disabling all the enhancements the problem should be resolved and your sound will start working again.

7. Disable Exclusive Mode

Navigate to Advanced tab and in Exclusive Mode section disable Allow applications to take exclusive control of this device. Now click on Apply and OK to save changes.

Failed to play sound test tone error message usually appears due to your sound settings, and one of the common problems is Exclusive Mode.

After disabling the Exclusive Mode the issue should be resolved completely.

8. Use a Sound Troubleshooter

When the Settings app opens, navigate to the Update & security section.

Now in the right pane select Playing Audio and click on Run the troubleshooter.

The Troubleshooter will now start. Wait while the troubleshooter fixes the problem.

According to users, you can fix Failed to play sound test tone error message simply by running a troubleshooter. There can be a glitch with your audio configuration that can cause this issue to appear.

Once the troubleshooter is finished the problem should be resolved and your audio will start working. Both methods above will perform the same troubleshooter, so feel free to use any of them.

9. Disable audio effects

Many sound cards come with dedicated software that offers various audio effects. Although these effects can sometimes improve your audio quality, they can often cause various problems to appear.

According to users, Failed to play sound test tone error message is closely related to these sound effects, and in order to fix this problem, it’s strongly advised to disable them.

To do that, simply open your audio configuration software, locate the Effects section and disable them all. After disabling all effects, check if the problem still appears.

10. Remove recently installed updates

Click on Update history.

List of updates will now appear. Click on Uninstall updates.

Now you should see recently installed updates. Double click a certain update in order to remove it.

According to users, Failed to play sound test tone error messages can appear due to certain Windows updates. Sometimes an update can have certain bugs and cause this problem to appear.

After you remove the recent updates check if the problem still appears. If not, it means that you found the cause of the problem. Now you just have to prevent the update from installing.

11. Perform an SFC scan

Open the Windows search bar and type cmd. Open Command Prompt as administrator.

When Command Prompt opens, enter sfc /scannow and press Enter to run it.

Sometimes Failed to play sound test tone error message can appear due to file corruption. Your system files can become corrupted and that will cause this error to appear.

However, you should be able to fix it simply by performing an SFC scan.

Users reported that running the SFC scan fixed the problem for them, so be sure to try it out. However, sometimes you won’t be able to fix the problem using the SFC scan.

Learn everything there is to know about System File Checker from our comprehensive guide.

12. Run DISM scan

Now enter the following command and then press Enter:
dism /online /cleanup-image /restorehealth

In some rare cases, you might not be able to run a SFC scan at all. To fix this error, you might have to run a DISM scan instead.

Once the DISM scan is finished, check if the error still persists. If you couldn’t run the SFC scan before, be sure to repeat it after performing a DISM scan.

13. Disconnect other USB devices

If you’re using USB headphones or speakers, you might encounter this problem due to other USB devices.

According to users, they encountered Failed to play sound test tone error message because of Xbox 360 wireless gaming receiver.

Expert Tip: Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.

Many users use their Xbox 360 controller with their PC, and sometimes the wireless receiver can cause this problem to occur.

To fix the issue, users are suggesting to disconnect the wireless receiver from your PC and restart it. Once your PC boots without the receiver, the sound should start working again.

If the sound is working, you can reconnect your wireless receiver again. This is a simple workaround, and it works according to users, so feel free to try it.

Keep in mind that you might have to repeat it if the issue reappears.

14. Set your audio device as the default communication device

When the Sound window opens, right-click any other device and choose Set as Default Communication Device.

Now right click your audio device and choose Set as default. Repeat the same steps and select Set as Default Communication Device.

According to users, Failed to play sound test tone error message can appear if your audio device isn’t set as the default device.

After following the above steps, the problem should be fixed and your sound will start working.

15. Disable your audio device

Now locate your audio device, right-click it and choose Disable from the menu.

A confirmation message will now appear. Click on Yes.

You’ll be asked to restart your PC. Click on Yes to restart it now.

Once your PC restarts, go back to Device Manager, right-click your audio device and choose Enable device from the menu.

If you’re frequently getting Failed to play sound test tone error message, you might be able to fix it simply by temporarily disabling your audio device.

After disabling and enabling your audio device, the problem should be resolved.

16. Connect your audio device directly to your PC

According to users, they experienced this issue while using a docking station on their laptop.

Laptop docking stations can be incredibly useful since they provide you with additional ports, but sometimes issues with them can occur.

Users reported that connecting their speakers or headphones to the docking station caused Failed to play sound test tone error message.

According to users, you can fix the problem by connecting the speakers to the audio port on your laptop. After doing that, the issue will be resolved.

As for the cause of the problem, your docking station might be faulty or it might not be fully compatible with your hardware or drivers.

17. Change the security permissions in the registry

Press Windows Key + R and enter regedit. Press Enter or click OK.

Optional: You might want to create a registry backup just in case. Modifying the registry can cause issues with your PC if you don’t modify it properly, so it’s advised to create a backup. To do that, click on File > Export.

Now set All as Export range and enter the desired file name. Choose a safe location and click the Save button.

Right-click the Audio key and choose Permissions from the menu.

After all entries and permissions are the same on both PCs, click on Advanced.

Check the Owner section on both PCs. If the owner section is different on the affected PC, be sure to change it accordingly.

If you’re getting this error frequently, you might be able to fix it by changing the security permissions. You’ll need to find another Windows 10 PC and compare the security permissions between the two.

After the settings are the same on both PCs, check if the problem still appears. This is an advanced solution, so if you’re not familiar with security permissions or registry, you might want to skip it.

Several users reported that adjusting their registry fixed the problem, so you might want to try that.

18. Check other USB devices

According to users, Failed to play sound test tone error message can occur if you’re using a USB hub. USB hubs are useful, especially if you tend to use multiple USB devices.

Users reported this problem while connecting both their gamepad and USB headphones to the same USB hub. It seems that some USB devices aren’t working properly together.

Users reported that disconnecting the gamepad from the USB hub fixes the issue for them, so you might want to try that.

If that solves the problem, in the future you’ll need to connect your USB headphones first, and then connect the gamepad to the USB hub. This is a simple workaround, so feel free to try it out.

19. Reinstall your AMD drivers

In some cases, your graphics card drivers can cause this problem to occur. According to users, certain graphics card drivers are also installing their audio drivers causing this problem to appear.

To fix the issue, you need to uninstall your AMD driver and reinstall it. To completely remove a graphics card driver from your PC, many users are suggesting to use Display Driver Uninstaller.

This is a free removal tool that will completely remove the graphics card driver along with all its associated files. Once you remove the driver, you need to download the latest driver for your graphics card.

While installing the driver, be sure to select the Custom Installation option. From there you’ll be able to choose which drivers you want to install. Be sure to deselect HDMI Audio Driver.

After doing that, only the graphics card driver will be installed, and your problem should be fixed.

Keep in mind that this issue can affect both AMD and Nvidia graphics cards, so be sure to try this solution even if you don’t use AMD graphics.

20. Restart Windows Audio service

Press Windows Key + R and enter services.msc. Click OK or press Enter.

Locate Windows Audio service, right-click it and choose Restart from the menu.

According to users, this issue can be caused by the Windows Audio service, and in order to fix it, you just have to restart this service.

After Windows Audio service restarts, the problem should be resolved and your sound will start working again.

21. Change your Local Users and Groups settings

Press Windows Key + R and enter lusrmgr.msc. Click on OK to press Enter.

In the right pane, right-click Administrators and choose Add to Group option from the menu.

A list of members will appear. Click on the Add button.

In the Enter the object names to select field enter Local Service. Click on the Check Names button. If everything is in order, click on OK.

NT AUTHORITY will now be added to the list of members. Click on Apply and OK to save changes.

If you’re having problems with Failed to play sound test tone error message, you might be able to solve the problem simply by changing Local Users and Groups settings.

After making the changes, restart your PC and check if the problem is resolved.

22. Delete DefaultLaunchPermission entry from the registry

Right-click Ole and choose Export from the menu.

Make sure that Selected branch is selected in the Export range section. Now enter the desired file name and click on Save.

Locate DefaultLaunchPermission in the right pane, right-click it and choose Delete.

A confirmation message will now appear. Click on Yes.

Sometimes problems in your registry can cause this issue to appear. To fix the problem, you need to find and remove DefaultLaunchPermission entry from the registry.

Once your PC restarts, check if the problem still appears. If not, you might want to restore DefaultLaunchPermission entry. To do that, simply run the file you created in Step 3.

After doing that, your registry will be restored to the original state.

I hope this comprehensive article helped you to solve the problem regarding playing a sound test tone in Windows 10.

Also, if you have any suggestions, comments, or questions, just write them down in the comments below.

ncG1vNJzZmivmaOxsMPSq5ypp6Kpe6S7zGidmqGcmrFuwM5mp6WZqWLAsMHNnWStnaOperW7zZ5ksKGemby4v4xqZ2g%3D