13 ways to fix Memory Management blue screen error for good
- BSoD error messages are the result of fatal system errors caused by faulty software or defective or incompatible hardware.
- The Memory Management error is a typical BSoD error, and you can use a specific repair tool that you can find below to fix it when it occurs.
- If your device ran into a problem with the memory management, then you should repair the registry by following the steps in this article.
- Also, update your drivers with a suitable software, which you can only find by continuing to read our complete guide.
XINSTALL BY CLICKING THE DOWNLOAD FILE
To fix various PC problems, we recommend Restoro PC Repair Tool:This software will repair common computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove viruses now in 3 easy steps:
- Restoro has been downloaded by 0 readers this month.
The Memory Management error message on SSD drives appears alongside the Blue Screen Of Death, and it can be a very annoying issue.
In this article, we’re going to show you a few tricks for resolving the Memory Management BSoD error.
The Memory Management error affects all Windows versions, including Windows XP, Windows 7, Windows Vista, Windows 8.1 and Windows 10.
It often occurs when users run highly demanding processes, such as complex games, VR games, watching 4K live streams, etc.
What causes Memory Management error on Windows 10 and 11?
This is a pretty common problem, so it’s not unusually to see Memory Management error on Windows 11. In most cases, this issue is caused by faulty memory modules, so we encourage you to check them.
This isn’t the only memory-related issue, and many users reported Video memory management internal error on their devices.
If your memory is the problem, you might encounter Your Computer is low on memory message, or in worst case scenario, you might not be able to boot your PC at all.
The Memory Management error occurs in the following situations:
- Memory Management on Asus, Acer, HP, Lenovo, Surface Pro and Surface Pro 3
- This BSoD error affects all devices, but when it comes to Microsoft’s Surface line, it seems that this issue is prevalent for Surface Pro and Surface Pro 3 devices.
I bought this computer about 2 months ago (Acer Predator g9-791) and whenever I play a game that is graphically intense, like Battlefield 4, I will get a blue screen with the error Memory Management error. I sent in the laptop to Acer and they replaced the motherboard and the ssd, I got the laptop back a week later but I still get the same error.
- Memory Management crashes
- In most cases, this error message simply remains on the screen, forcing users to reboot their devices.
- However, it may also cause PC crashes, and sometimes even crash loops.
Way too many times in the recent past, I have gotten the Windows BSOD error of Memory Management for things that should have been fine for me to run. It was either when I was drawing, watching a livestream and messaging someone at the same time, especially when doing stuff in VR through my Oculus Rift + Touch controllers.
- Windows 10 memory management loop
- This error message can throw your computer into a so-called error loop. More specifically, although the PC doesn’t crash, the Memory Management error is still there every time users restart their devices.
Memory management BSOD resulted in laptop rebooting. Since then, I am stuck in an automatic repair loop.
I canot get Win10 to run, only access to the Recovery Environment.
As we said, the Memory Management error message is just another BSoD error message. The simplest and the most common solution for this problem is to restart your computer.
After the restart, you shouldn’t get this error message anymore. So, before you try anything else, just restart your computer and see if the issue has been fixed.
However, if the Memory Management error message still appears after you restarted your PC, there are a few advanced troubleshooting solutions that you should try, so read on.
How do I fix the Memory Management error in Windows 10?
1. Run SFC scanner
sfc/scannow
The sfc/scannow command is Microsoft’s tool for resolving various system problems. Even if it doesn’t sound like an actual solution, a lot of users who received this error message said that this command fixed the issue.
2. Run Windows Memory Diagnostic tool
If the sfc command didn’t fix it, and you still receive this error message, something’s probably wrong with your RAM memory.
If your RAM memory is corrupted, the best solution is to replace it with a new one. But, before you remove your current RAM memory, you should make sure it’s broken.
We recommended you to run the Windows Memory Diagnostic tool, and if it tells you that your memory is the problem, you can change it.
3. Update your drivers
The Windows Blue Screen Memory Management error can be caused by outdated or broken drivers, that’s why you should keep your PC functional all the time.
If you want to keep your PC in an optimal condition without wasting time performing some extra operations then you need a great software solution.
To make sure that everything goes smoothly and avoid any kind of GPU driver errors, be sure to use a complete driver update assistant that will solve your problems with just a couple of clicks, and we strongly recommend DriverFix. Follow these easy steps to safely update your drivers:
DriverFix
Keep you GPU on the peaks of their performance without worrying about its drivers.
Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.
4. Revert your PC settings to default
If you increase your PC’s clock rate, running it at a higher speed than it was initially designed to run, you should expect to encounter various technical issues.
As a result, if you’re using various overclocking tools, try reverting your computer’s settings to default and check if this memory management alert persists.
5. Run a full system scan
Malware may cause various issues on your computer, including errors. Perform a full system scan in order to detect any malware running on your computer.
You can use Windows’ built-in antivirus, Windows Defender, or third-party antivirus solutions.
6. Repair your registry
Use Microsoft’s System File Checker to check for system file corruption. The utility verifies the integrity of all protected system files and repairs files with problems when possible.
7. Update your OS
Make sure that you’re running the latest Windows OS updates on your machine. Microsoft constantly rolls out Windows updates in order to improve the system’s stability and fix various issues.
To access the Windows Update section, you can simply type update in the search box. This method works on all Windows versions. Then go to Windows Update, check for updates and install the available updates.
8. Clean your temporary files and folders
The simplest and quickest manner to delete your temporary files and folders is to use Disk Cleanup. As you use your computer or browse the Internet, your PC accumulates various unnecessary files.
These so-called junk files may affect your PC’s processing speed, causing apps to respond slowly and may also trigger various error codes, including the memory management error code.
Read more about this topicClean your temporary files and then try to write data on the problematic storage device again. Also, for some Disk Cleanup issues, you can always be prepared with our solutions.
9. Check your disk for errors
chkdsk C: /f 
10. Remove recently installed software
If you recently installed new software on your computer, try uninstalling it. Then restart your PC, and see if the issue has been solved.
Also, check out our best uninstaller tools list to make your life easier and to keep your PC in an optimal condition.
11. Check for programs causing memory leaks
12. Manually increase Virtual Memory
By increasing your virtual memory, you will be able to resolve the memory issues or alerts. Of course, you will have to do it manually as there are no apps dedicated to this matter.
13. Run System Restore
If the problem started recently, run System Restore. If this issue occurred after you installed new software on your computer, this tool helps you remove recently added apps and programs.
The System Restore option allows you to restore the previous well-performing system configuration without losing any files, except for a few customizable features and settings.
After the procedure has been completed, check to see if the problem persists.
Windows 10 offers a series of advanced recovery option that allows users to clean install the OS. If you’re a Windows 10 user, you can also use the Reset this PC recovery option.
If something’s indeed wrong with your RAM memory, you already know what to do.
Did at least one of these solutions help you with the Memory Management Error in Windows 10? Tell us in the comments section below.
ncG1vNJzZmivmaOxsMPSq5ypp6Kpe6S7zGiknqWfp8agucCnmKCdnZq7tXnWoqWdp6eoenJ8jg%3D%3D